View ES1A-13-F_734378.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SPICE MODELS: ES1A ES1B ES1C ES1D ES1G
ES1A - ES1G
1.0A SURFACE MOUNT SUPER-FAST RECTIFIER Features
* * * * * *
Glass Passivated Die Construction Super-Fast Recovery Time For High Efficiency Low Forward Voltage Drop and High Current Capability Surge Overload Rating to 30A Peak Ideally Suited for Automated Assembly Lead Free Finish/RoHS Compliant (Note 5)
Mechanical Data
* * * * * * * *
Case: SMA Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Lead Free Plating (Matte Tin Finish). Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band or Cathode Notch Marking: Type Number & Date Code: See Below Ordering Information: See Below Weight: 0.064 grams (approximate)
B
Dim A
SMA Min 2.29 4.00 1.27 0.15 4.80 0.10 0.76 2.01 Max 2.92 4.60 1.63 0.31 5.59 0.20 1.52 2.30
A
C
B C D E G H
D
J
H
G E
J
All Dimensions in mm
Maximum Ratings and Electrical Characteristics
Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TT = 110C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Drop Peak Reverse Current at Rated DC Blocking Voltage Reverse Recovery Time (Note 1) Typical Total Capacitance (Note 2) Typical Thermal Resistance, Junction to Terminal (Note 3) Operating and Storage Temperature Range @ IF = 0.6A @ IF = 1.0A @ TA = 25C @ TA = 100C Symbol VRRM VRWM VR VR(RMS) IO IFSM VFM IRM trr CT RqJT Tj, TSTG
@ TA = 25C unless otherwise specified ES1B 100 70 ES1C 150 105 1.0 30 0.90 0.98 5.0 200 25 10 40 -65 to +150 35 3/4 1.25 ES1D 200 140 ES1G 400 280 Unit V V A A V mA ns pF C/W C
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. ES1A 50 35
Ordering Information
Device* ES1x-13-F
Notes: 1. 2. 3. 4. 5.
(Note 4) Packaging SMA Shipping 5000/Tape & Reel
Measured with I F = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. Unit mounted on PC board with 5.0 mm 2 (0.013 mm thick) copper pad as heat sink. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. *x = Device type, e.g. ES1A-13-F. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
Marking Information
YWW XXXX
DS14001 Rev. 11 - 2 1 of 3 www.diodes.com
XXXX = Product type marking code, ex. ES1A = Manufacturers' code marking YWW = Date code marking Y = Last digit of year ex: 2 for 2002 WW = Week code 01 to 52
ES1A - ES1G
a Diodes Incorporated
IF, INSTANTANEOUS FORWARD CURRENT (A)
1.5
10
IO, AVERAGE RECTIFIED CURRENT (A)
ES1A - ES1D
ES1G
1.0
1.0
0.5
0.1
Tj = 25 C
0 25 50 75 100 125 150 175 TT, TERMINAL TEMPERATURE ( C) Fig. 1 Forward Current Derating Curve
0.01 0 0.4 0.8 1.2 1.6
VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics
IFSM, PEAK FORWARD SURGE CURRENT (A)
30
Single Half-Sine-Wave (JEDEC Method)
100
Tj = 100 C
20
10
10
1.0
Tj = 25 C
0 1 10 NUMBER OF CYCLES AT 60 Hz Fig. 3 Surge Current Derating Curve 100
0.1 0 40 80 120
PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics
trr +0.5A
Device Under Test
(-)
Pulse Generator (Note 2)
0A
(+)
50V DC Approx
-0.25A
(-)
Oscilloscope (Note 1)
(+)
-1.0A Set time base for 50/100 ns/cm
Fig. 5 Reverse Recovery Time Characteristic and Test Circuit
DS14001 Rev. 11 - 2
2 of 3 www.diodes.com
ES1A - ES1G
IMPORTANT NOTICE Diodes, Inc. and its subsidiaries reserve the right to make changes without further notice to any product herein to make corrections, modifications, enhancements, improvements, or other changes. Diodes, Inc. does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT The products located on our website at www.diodes.com are not recommended for use in life support systems where a failure or malfunction of the component may directly threaten life or cause injury without the express written approval of Diodes Incorporated.
DS14001 Rev. 11 - 2
3 of 3 www.diodes.com
ES1A - ES1G

▲Up To Search▲

Price & Availability of ES1A-13-F

	To Download ES1A-13-F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .